Oui heureusement :-) Une vidéo de quelques minutes explique le fonctionnement de base. Des piles dans le MyoAlert, on pose le capteur sur la peau, on règle la sensibilité pour que les mouvements soient détectés, et le carillon sonne à la 3ième detection.

Yes, the sensor can detect tiny movements of the cheeks, forehead, or even a blink of the eye.

Yes, and this will allow you to call a caregiver day or night. The sensor is made of cellulose acetate, like the arms of glasses. Derived from cotton fibers, it is hypoallergenic.

The MyoAlert can control up to 3 chimes which can be placed in different rooms of the house.

The sensor is very light (a few grams) and can be attached using an elastic band suitable for use on the arm or leg. In other cases, a tape can be used to keep it on the skin.

Signal processing has been evolving since 2019 thanks to user feedback. To avoid triggering the chime inadvertently, it is necessary to make 3 movements one after the other. Involuntary contractions are therefore filtered.

Yes, the MyoAlert has a standard 3.5mm jack and is compatible with systems that accept either a NO (normally open) or NC (normally closed) input.

First of all, it is possible to try the MyoAlert for free for 1 month [by clicking here]. For special cases, there is the possibility of recording the signals corresponding to the movements you can make so that the manufacturer can improve detection.

The sensor and the MyoAlert communicate several dozen times per second to analyze movements in real time. In the event of a cable cut or disconnection, the box will emit a few beeps to signal the error, then will sound all the chimes to alert caregivers.

As the range of motion possible for degenerative diseases decreases, the sensitivity is adjustable. Also the box itself can be updated via WiFi for new features.

Yes, MyoAlert uses the same DiO/Chacon protocol and can control lights, roller shutters and other connected devices from this brand.

The MyoAlert can connect to home WiFi to interface with these home automation gateways. Contact the manufacturer for a personalized study.

Just put batteries in the box to start using it. The WiFi connection is only for configuration in special cases, and there is no need to activate it normally.